December 10th 2023


AtomOS 11.04.00 Firmware Release Notes

Shogun Connect


Installation Instructions


Atomos recommends that your Shogun Connect is plugged into mains power before commencing the firmware update.

  1. Insert a compatible, formatted SSD into the Docking Station.
  2. Unzip the downloaded file and copy the ATOMSGC.FW file to the root directory of the SSD.
  3. Eject the SSD according to operating system guidelines.
  4. Insert the SSD into the Shogun Connect.
  5. Power on the Shogun Connect and the firmware upgrade process will begin automatically.
    Note: If your Shogun Connect is already powered on, you will be prompted to perform the firmware upgrade when a drive containing new firmware is inserted.
  6. Once the upgrade is complete, your Shogun Connect will power itself down.
  7. Power your Shogun Connect back on and the device will automatically complete the update process.
  8. To verify if the firmware upgrade was successfully completed, navigate to the main menu and scroll to the info tab.

Note: Once firmware 11.04.00 is successfully installed on your Shogun Connect, the unit may reboot to update its internal hardware modules. Do not interrupt the firmware installation process.

New Features


Panasonic LUMIX G9 II RAW Support

ProRes RAW Recording Specification via HDMI

Note: WB and ISO controls/slider adjustments are available for this camera in Final Cut Pro.

Sony a9 III RAW Support

ProRes RAW Recording Specification via HDMI

Note: WB and ISO controls/slider adjustments are available for this camera in Final Cut Pro.

Known Limitations to be resolved in future releases